Tips And Tricks For Laminate Floor Installation

January 20th, 2017

Category:
by:

Laminate floor installation is often the best choice when you’re renovating a room in your home. It’s popular with DIY enthusiasts and can be put down quickly and easily. Check out our guide to getting it installed correctly, and enjoying a floor that will look like new for years to come.

Laminate Flooring Is The Best Option For Your Floors

Hardwood floors are often seen as the best option for floors, but laminate floors have really proven their worth in recent years. When it was introduced in the ’90s, many people dismissed it as a curiosity. However, time has shown that they’re incredibly hardwearing, stain resistant, and easy to fit. If you want the look and feel of hardwood without the price tag, laminate could be the answer.

One Of The Easiest Jobs For A DIY Enthusiast

Chicago laminate floor installation is an easy job for any competent DIY-er. That’s because the floorboards are laid using a ‘floating floor’ method. This means they aren’t held down by nails or glue. Instead, the planks are snapped together using a tongue and groove method, making it easy to get the job done. In fact, it can be done in a matter of hours, depending on the size of your room.

Tips To Get Your Floor Installed Correctly

  • Chicago laminate floor installationRemove furniture from the area: You may want to leave heavier items in the room and work around them, but you’re only making the job harder for yourself. Remove everything from the room, so that you have a blank space to work with.
  • Pry up show molding and undercut where needed: If you shave show molding around the baseboards, pry them up carefully. You’ll need to refit them when the flooring has gone down. Undercut your door casings and side jambs so your flooring can slip underneath neatly.
  • Prep your subfloor: Taking the time to this will ensure that your laminate lies correctly, first time. Hammer down any nails that are protruding from the subfloor. Use a 2 inch drywall screw on any area that squeaks. Finally, thoroughly clean and dry the floor ready for the next step.
  • Lay out the underlay: The underlay for laminate is a thin rubber sheet that protects against moisture and deadens sound. Roll it out across the floor and position it. You don’t need to attach it to the floor, but you can use masking tape to connect seams together, so they don’t move.
  • Be sure to measure your floor: Before you lay any planks, make sure that you’ve measured the floor. If you do that, you know exactly how much you will need and avoid having to run out halfway through the job to buy more, or having piles of laminate planks to return.
  • Use a tapping block: You may think a hammer will do the job, but in fact it could do damage to your planks. Use a tapping block made for your laminate in order to get the planks in place correctly.

How To Avoid Common Floor Laying Mistakes

  • Laminate Floor InstallationMake sure you’re up for the challenge: Laying a laminate floor is an easier DIY task, but not everyone is up to it. Ask yourself honestly if you could do it. If not, here at Chicago Floor installation we can do it for you. Our prices are very reasonable, so it may be worth looking into professional installation.
  • Check your sub floor is level: Before you even get started on laying your floor, make sure that the subfloor is level. Use a spirit level to check. If you don’t, you can end up with problems getting the laminate planks to lie correctly.
  • Use quality laminate flooring: When buying laminate flooring, choose a quality material. Cheaper planks can warp or buckle over time, meaning you’ll have to replace them sooner. Here at Classic Floors Chicago, we only carry quality floorings. That way, you know you’re buying a product you can trust.
  • Keep temperature in mind: If you’re storing your planks outside, you may find that they’re cold when you bring them in. That means that you’re installing them cold. Once down on the floor, they can expand in the warmth, leading to damage. Bring your planks inside and let them warm up first, to avoid this problem.
  • Follow the manufacturer’s instructions: Even if you’ve done this hundreds of times before, this may be the first time you’ve ever installed this kind of laminate flooring Chicago. Check the instructions before you start to avoid making any errors that could have easily been avoided.

As you can see, installing laminate floors is a simple job, but you do need to be mindful how you go about it. Follow our tips and tricks and you’ll have a fantastic floor in no time.

 

Leave a comment

Your email address will not be published. Required fields are marked *